COMPRESSION LOAD CELL KOMPRESSIONSKRAFTMESSDOSE Strada del Lionetto 16/a, 10146 Torino, ITALY Tel +39 011 5360884 - FAX +39 011 19835705 E-Mail: [email protected] http://www.asa-rt.com Technical data sheet Technisches Datenblatt Compression load cell with high resonance frequency Kompressionskraftmessdose mit erhöhter Resonanzfrequenz Nominal Force F (N) Messbereich F (N) 1K Limit load Grenzlast Ultimate load Bruchlast Stainless steel rostbeständiger Edelstahl Technische Daten Technical Data - Sensitivity - Accuracy - Repeatability - Combined error - Zero bridge balance - Temperature effect on zero - Nominal temperature - Working temperature - Bridge resistance - Maximum supply voltage - Protection Level - Lunghezza cavo uscente - Connettore (optional) - Resonance frequency - Deformation (100% F) - Insulation resistance 1.0 ÷ 1.5 mV / V < 0.5 % F < 0.5 % F <1%F ±1%F ± 0.1% F / 10 ° C +10 … +60 ° C -20 … +80 ° C 700 ohm (8 strain gauges) 12 Vdc IP65 2m Lumberg > 3 KHz < 0.07 mm > 10 Gohm - Empfindlichkeit - Genauigkeit - Wiederholgenauigkeit - Totalfehler - Nullpunktabweichung - Temperatureinfluß auf den Nullpunkt - Nominaltemperaturbereich - Arbeitstemperaturbereich - Brückenwiderstand - Max. Speisespannung - Schutzgrad - Kabellänge - Anschlußstecker (optional) - Resonanzfrequenz - Verformung (100% F) - Isolationswiderstand

ASSEMBLING EXAMPLE EINBAUBEISPIELE - The load cell is a sensible element. Avoid each kind of overload, even temporary, both during the assembling and the operation phase. - The force (F) has to be applied on the central axis of the load cell, perpendicularly to the bearing surface of the load cell itself, wih a ±1° tolerance. - Avoid all lateral forces which could change the load cell sizes and damage it. - Prepare a base support of hard material (> 47 HRC), with more then 1 cm height, and planarity of 0,01 mm, to avoid to have on the cell undesired stresses that can alter the measure. -Die Kraftmessdose...