BlueWave 200 Intensity Adjustment UV Curing Spot Lamp Product Bulletin
4Seiten

Product Bulletin Light-Curing Spot Lamp The Process Control You Need Without the Added Cost! ® The BlueWave 200 light-curing spot lamp offers the highest intensity and most user-friendly operation in the industry. The patented intensity adjustment feature allows users to manually adjust intensity. The intensity adjustment feature assists users in validating an appropriate intensity range and maintaining that range during production. Intensity measurement is easily accomplished with the Dymax ACCU-CAL™ 50 radiometer. Scheduled intensity measurements taken during the production process will indicate whether additional intensity adjustments are required. This method of measurement provides the most accurate readings as they are taken through the lightguide in the actual production setting. The BlueWave 200 spot lamp primarily emits UVA and blue visible light (300-450 nm) and is designed for light curing of adhesives, coatings, and encapsulants. It contains an integral shutter which can be actuated by a foot pedal or PLC making it ideal for both manual and automated processes. A universal power input provides consistent performance at any voltage (90-264V, 47-63 Hz). Dymax also offers a wide range of long-lasting lightguides including liquid/fiber, single/multi-pole, and lightguides in various lengths. The BlueWave 200 with manual intensity adjustment is the most versatile, user-friendly and reliable UV light-curing spot lamp available. Marked BlueWave 200 UV Light-Curing Spot Lamp with Patented Intensity Adjustment and Four-Pole Lightguide FEATURES 2 Patented intensity adjustment feature >17,000 mW/cm initial intensity Simple to operate and adjust 2,000 hours useful life Integral shutter with digital timer Foot switch or PLC integration Proprietary “Cool Blue™” filter virtually eliminates liquid lightguide degradation Wide range of lightguides available (liquid/fiber, single/multi-pole, various lengths) Universal power input operates around the globe Fast bulb replacement

How Does the BlueWave® 200's Patented Intensity Adjustment Feature Work? All bulbs used to power high intensity light-curing spot lamps degrade over time from normal use. This typically results in a gradual decrease in total intensity as the bulb ages (shown in Chart 1). Recognizing this, UV light-curing processes are usually validated using the lowest acceptable intensity level to maximize bulb life. However, this means that for the majority of the production process, curing is being done with a higher intensity level than is ® actually necessary, and it can be expected that the intensity...

SPECIFICATIONS Initial Intensities Total (280-450 nm) Visible (400-450 nm) UVA* (320-395 nm) UVB (280-320 nm) 2 40+ W/cm 2 17+ W/cm 2 17+ W/cm 2 7 W/cm Intensity Adjustment Power Requirements Power Supply Bulb Reflector Shutter Timer Shutter Activation I/O Port Manual from 1% to 100% output 90-264V, 47-63 Hz Solid-state, 200 Watt 200 Watt mercury bulb included; replacement in less than one minute Elliptical; glass with dichroic coating to reflect UV and minimize IR Digital LCD timer up to 99.99 seconds; manual or timed shutter Foot switch or PLC 9 pin D – sub-miniature connector Inputs:...

UV-Blocking, Over-the-Glasses Eye Protection Gray Tinted PN 35285 Green Tinted PN 9162044 Lightguide Mounting Stand (fits 3 mm, 5 mm and 8 mm lightguides) PN 39700 ACCU-CAL™ 50 Radiometer for measuring the UV intensity of spot lamps, flood lamps and conveyor systems PN 39560 Liquid-Lightguides available in 1, 2, 3 & 4-pole configurations (see Table 1. on Page 2 for sizes and part numbers) Angled Terminators for Lightguides 3 mm/60 PN 39029 3 mm/90 PN 39030 5 mm/60 PN 38042 5 mm/90 PN 38049 Rod Lenses Shown: BlueWave 200 with 8 mm rod lens (rod lenses require an 8 mm lightguide) 2” x 2” Area...