video corpo

E63 DC

E63 DC

Zusammenfassung des Produktkatalogs
Übersicht: Der Bericht behandelt E63 DC-Kondensatoren mit Überdrucksicherung, geeignet für Gleichspannungen von 800 bis 6300 V. Sie bieten hohe Stromtragfähigkeit und ein gutes Kapazitäts-Volumen-Verhältnis, sind mit flüssigem Harz gefüllt und haben hohe Überspannungsfestigkeit.
Hauptmerkmale:
  • Selbstheilfähigkeit und Überdruck-Unterbrecher für sicheren Betrieb.
  • Standards: IEC 61071, optional IEC 61881.
  • Gehäuse aus Aluminium, pflanzenölbasiertes Füllmittel, PCB-frei.
  • Isolationsgüte: C x Ris 5000 s, Betriebstemperatur: -25 bis +70°C.
  • Ausfallrate: 50 FIT, Lebensdauer: 100.000 Stunden bei 70°C.
Technische Spezifikationen:
  • Kapazität: 100 µF bis 1000 µF, Spannungen von 800V bis 6300V DC.
  • Maximaler Strom: 16 A bis 100 A je nach Modell.
  • Schutzgrad: IP 00, Feuchteklasse: F oder C.
Design und Abmessungen:
  • Gehäusedurchmesser: 45 mm bis 136 mm.
  • Verschiedene Anschlussarten, z.B. Flachstecker oder Gewindebolzen.
Zusätzliche Informationen: Weitere Werte und Abmessungen auf Anfrage. Geeignet für Anwendungen mit hohen Effektivströmen.
Technische Spezifikationen:
  • Dosen-Durchmesser: 60...136 mm, Material: Aluminium.
  • Basismontage: M12, Deckel: Flansch-Aluminium.
  • Klemmen: L1, M1, K1 mit unterschiedlichen Imax-Werten.
  • Schutzart: IP 20, Feuchtigkeitsklasse: C.
Wichtige Hinweise:
  • Sicherheit: Unsachgemäße Anwendung kann zu Explosionen führen.
  • Montage und Kühlung: Zwangsbelüftung empfohlen.
  • Schutz gegen Überspannungen: Selbstheilendes Dielektrikum.
Ausfallrate:
  • Abhängig von Temperatur und Spannung, FIT-Raten bei 70°C.
  • Vermeidung von maximaler Spannung und Temperatur empfohlen.
Überdruck-Abreißsicherung (BAMTM):
  • Verhindert Bersten bei Überdruck.
  • Wirkt innerhalb der Belastungsgrenzen zuverlässig.
Garantie:
  • 3 Jahre Garantie auf Material- und Herstellungsfehler.
  • Keine Garantie bei unsachgemäßer Anwendung.
Mehr anzeigen

Katalogauszüge

E63 DC-1

DC CAPACITORS WITH OVERPRESSURE PROTECTION DC KONDENSATOREN MIT ÜBERDRUCKSICHERUNG

 Katalog auf Seite 1 öffnen
E63 DC-3

The special kind of films and coatings used in our E63-capacitors makes them interesting particularly for applications with high rms currents, e.g. as smoothing or supporting capacitors in buffer storage circuits. Filled with liquid resin, these capacitors have a high specific ratio of capacitance to volume. At the same time, they are extremely overvoltage proof. Very good self-healing characteristics and the integrated overpressure protection (break-action mechanism) ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life. Die besondere...

 Katalog auf Seite 3 öffnen
E63 DC-4

Design drawings see on pages 9-14_Maßbilder siehe auf den Seiten 9-14 Other values and dimensions available on request_Andere Werte und Abmessungen auf Anfrage erhältlich

 Katalog auf Seite 4 öffnen
E63 DC-5

Design drawings see on pages 9-14_MaßbiLder siehe auf den Seiten 9-14 Other values and dimensions available on request_Andere Werte und Abmessungen auf Anfrage erhältlich

 Katalog auf Seite 5 öffnen
E63 DC-6

Design drawings see on pages 9-14_Maßbilder siehe auf den Seiten 9-14 Other values and dimensions available on request_Andere Werte und Abmessungen auf Anfrage erhältlich

 Katalog auf Seite 6 öffnen
E63 DC-7

KONDENSATOREN MIT EINEM GEHÄUSEDURCHMESSER VON 45...55 mm

 Katalog auf Seite 7 öffnen
E63 DC-8

KONDENSATOREN MIT EINEM GEHÄUSEDURCHMESSER VON 75...136 mm

 Katalog auf Seite 8 öffnen
E63 DC-9

KONDENSATOREN MIT EINEM GEHÄUSEDURCHMESSER VON 75...136 mm

 Katalog auf Seite 9 öffnen
E63 DC-10

KONDENSATOREN MIT EINEM GEHÄUSEDURCHMESSER VON 50/55/65 mm

 Katalog auf Seite 10 öffnen
E63 DC-12

CAPACITORS WITH A CAN DIAMETER OF 60...136 mm KONDENSATOREN MIT EINEM GEHÄUSEDURCHMESSER VON 60...136 mm 11 For design K1, L1 and M1 the central screw has no contact_Bei den Ausführungen K1, L1 und M1 hat die mittlere Klemme keinen Kontakt

 Katalog auf Seite 12 öffnen
E63 DC-13

Important Remarks Wichtige Hinweise Safety ELECTRONICON will not indemnify or be responsible for any kind of damages to persons or property due to the improper application of any capacitors purchased from ELECTRONICON or its distributors. The capacitors should only be used for the application intended. Sicherheit ELECTRONICON übernimmt keine Verantwortung oder Haftung für jegliche Schäden an Personen oder Eigentum, welche aus der unsachgemäßen Anwendung von bei ELECTRONICON oder seinen Distributoren erworbenen Kondensatoren herrührt. Die Kondensatoren dürfen ausschließlich für ihren Bestimmungszweck...

 Katalog auf Seite 13 öffnen
E63 DC-14

Failure Rate The failure probability of a component is a statistical value which is described by a log-normal distribution: Ausfallrate Die Ausfallwahrscheinlichkeit eines Bauelements ist eine statistische Größe, die mit Hilfe einer Normalverteilung beschrieben wird. Es gilt: N = number of functional components after period t Anzahl der nach der Zeit t intakten Bauelemente No = total number of components at time t = 0 Gesamtzahl der Bauelemente zum Zeitpunkt t = 0 = failure rate Ausfallrate is the failure rate, which alternatively is also stated as the so-called FITrate (FIT = Failures In Time...

 Katalog auf Seite 14 öffnen
E63 DC-15

Functioning of the BAMTM (Break Action Mechanism) In the event of overvoltage or thermal overload or ageing at the end of the capacitor’s useful service life, an increasing number of selfhealing breakdowns may cause rising pressure inside the capacitor. To prevent it from bursting, the capacitor is fitted with an obligatory „break action mechanism“ (BAMTM). The BAMTM is based on an attenuated spot at one of the connecting wires inside the capacitor. With rising pressure the case begins to expand, mainly by opening the folded crimp and pushing the lid upwards. As a result, the prepared connecting...

 Katalog auf Seite 15 öffnen
E63 DC-16

Warning: It has to be noted that this safety system can act properly only within the permitted limits of loads and overloads. The simple presence of a safety mechanism does not mean that catastrophic failures are completely impossible. Strong overvoltages, permanent external heat, and heavy current overload, e.g. during harmonic resonances may cause sudden, uncontrollable rise of temperature and pressure inside the can which may not leave sufficient time for the BAMTM to act properly, and result in explosion and fire. For more detailed information, please order our long-version catalogue „Capacitors...

 Katalog auf Seite 16 öffnen

Alle Kataloge und technischen Broschüren von ELECTRONICON Kondensatoren

  1. E12/E33

    25  Seiten

  2. E62 AC/DC

    40  Seiten

  3. E51 AC/DC

    24  Seiten

  4. E61 DC

    34  Seiten

  5. E50.U SR17

    3  Seiten

  6. FKD-MV™

    16  Seiten

  7. E90 MSD™

    32  Seiten

  8. 280 MKP UHD

    2  Seiten

  9. FK-DR CU/ALU

    8  Seiten

* Die Preise verstehen sich ohne MwSt., Versandkosten und Zollgebühren. Eventuelle Zusatzkosten für Installation oder Inbetriebnahme sind nicht enthalten. Es handelt sich um unverbindliche Preisangaben, die je nach Land, Kurs der Rohstoffe und Wechselkurs schwanken können.