IO-Link Supplement
5Seiten

{{requestButtons}}

Katalogauszüge

IO-Link Supplement - 1

1. Physical layer Note: The IO-Link Device's max. current consumption (inclusive load current) shall not exceed the master port's max. output power current. Hinweis: Max. Stromaufnahme des IO-Link Devices (inkl. Lastströme) darf max. Ausgangsstrom des Master-Ports nicht überschreiten. IODD Version Valid for IO-Link version Gültig für IO-Link Version Temperature in 0.1°C Flowrate Unit depending on Index 440 Measurement Mode Velocity in 0.01m/s Volume in 0.1l/min Relative in 0.1% Temperatur in 0.1°C Flowrate Einheit abhängig von Index 440 Messmodus Speed in 0.01m/s Volumen in 0.1l/min Relativ in 0.1% Record: 6 Byte - Process Data In Record: 6 Byte - Prozess Daten Eingabe SICK AG, Erwin-Sick-Strasse 1, D-79183 Waldkirch Please find detailed addresses and additional representatives and agencies in all major industrial nations at www.sick.com IODD version Process Data Length (IN) Warning Active Device State Warnung Aktiv More representatives and agencies at www.sick.com ∙ Subject to change without notice ∙ The specified product features and technical data do not represent any guarantee. Weitere Niederlassungen finden Sie unter www.sick.com ∙ Irrtümer und Änderungen vorbehalten ∙ Angegebene Produkteigenschaften und technische Daten stellen keine Garantieerklärung dar. Plus de représentations et d’agences à l’adresse www.sick.com ∙ Sujet à modification sans préavis ∙ Les caractéristiques de produit et techniques indiquées ne constituent pas de déclaration de garantie. Para mais representantes e agências, consulte www.sick.com ∙ Alterações poderão ser feitas sem prévio aviso ∙ As características do produto e os dados técnicos apresentados não constituem declaração de garantia. Flere repræsentanter og agenturer på www.sick.com ∙ Med forbehold for ændringer og fejl ∙ De anførte produktegenskaber og tekniske data udgør ikke nogen garantierklæring. Altri rappresentanti ed agenzie si trovano su www.sick.com ∙ Contenuti soggetti a modifiche senza preavviso ∙ Le caratteristiche del prodotto e i dati tecnici non rappresentano una dichiarazione di garanzia. Meer vestigingen en vertegenwoordigingen vindt u op www.sick.com ∙ Wijzigingen en correcties voorbehouden ∙ Aangegeven producteigenschap pen en technische gegevens vormen geen garantieverklaring. Más representantes y agencias en www.sick.com ∙ Sujeto a cambio sin previo aviso ∙ Las características y los datos técnicos especificados no constituyen ninguna declaración de garantía. 欲了解更多代表机构和代理商信息,请登录 www.sick.com ∙ 如有更改, 不另行通知 ∙ 对所给出的产品特性和技术参数 的正确性不予保证。. The following ISDUs will not be saved via Data-Storage: Device Specific Tag, Simulation and Special Action Scratchpad Die folgenden ISDUs werden nicht über Data-Storage gesichert: Device Specific Tag, Simulation und Sonderfunktion Speicher IO-Link specific IO-Link spezifisch Format Length (Offset) 12 (0x0C) Please note the validity of the additional operating instructions for automation functions Name Device Access Locks Data Storage Lock Local User Interface Bit (3) Lock Remark [Unit] Format Länge (Offset) Value / Range Vendor Name Product Name Product Text Serial Number Hardware Version Firmware Version Lokale Benutzerinterface-Sperre 0 = Device is OK 1 = Maintenance required 2 = Out of specification 3 = Functional check 4 = Failure 5...255 = Reserved Device Status Application Specific Tag String Anwendungsspezifische Markierung Page 1 of 5 1 ro = read only, wo = write only, rw = read/write / ro = nur lesen, wo = nur schreiben, rw = lesen/schreiben 2 COM values specify the bitrate (

Katalog auf Seite 1 öffnen
IO-Link Supplement - 2

IO-Link specific IO-Link spezifisch Format Length (Offset) Process Data Input Remark [Unit] Format Länge (Offset) Value / Range Prozessdaten Eingang SICK device specific Bemerkung [Einheit] 0 = Gerät ist OK 1 = Wartung erforderlich 2 = Außerhalb der Spezifikation 3 = Funktionsprüfung 4 = Fehler 5...255 = Reserviert SICK spezifisch Format Length (Offset) Format Länge (Offset) Teach Status 0 = Idle 3 = success 4 = Wait for Teach min 5 = Busy 12 = Error Teach max 13 = Error Teach min 14 = Error Sensor not in Teach Mode Teach Status 0 = Bereit 3 = erfolgreich 4 = Warten auf Teach min 5 = in...

Katalog auf Seite 2 öffnen
IO-Link Supplement - 3

SICK device specific SICK spezifisch Format Length (Offset) Value / Range 0 = Flow Hysteresis norm open 1 = Flow Hysteresis norm closed 2 = Flow Window norm open 3 = Flow Window norm closed 6 = Temp Hysteresis norm open 7 = Temp Hysteresis norm closed 8 = Temp Window norm open 9 = Temp Window norm closed 16 = Input OR with Q1 17 = Input AND with Q1 18 = Application Specific 20 = Off Pin Q2 inactive Q2 Switchpoints Flow Relative Format Länge (Offset) 0 = Durchfluss Hysterese Schliesser 1 = Durchfluss HystereseÖffner 2 = Durchfluss Fenster Schliesser 3 = Durchfluss Fenster Öffner 6 =...

Katalog auf Seite 3 öffnen
IO-Link Supplement - 4

SICK device specific SICK spezifisch Value / Range 0 = Off Simulation inactive 1 = 0% Flow Simulation 2 = 25% Flow Simulation 3 = 50% Flow Simulation 4 = 75% Flow Simulation 5 = 100% Flow Simulation 6 = -25°C Temp Simulation 7 = 0°C Temp Simulation 8 = 25°C Temp Simulation 9 = 50°C Temp Simulation 10 = 75°C Temp Simulation 11 = 100°C Temp Simulation 12 = 125°C Temp Simulation 13 = 150°C Temp Simulation 14 = Failure simulate Failure Filter (process data) Linear Flow Factor Signal Quality PowerUp Counter Supply Voltage Sensor Temp Reset Min/Max Error Delay Error Level Format Length (Offset)...

Katalog auf Seite 4 öffnen
IO-Link Supplement - 5

SICK device specific Index dec (hex) -------------------------------------------------------------- Value / Range Remark [Unit] Format Länge (Offset) Process Temperature too high true = Active false = Inactive Interner Fehler true = Active false = Inactive true = Aktiv false = Inaktiv Sensor Temperature too high true = Active false = Inactive true = Aktiv false = Inaktiv true = Active false = Inactive true = Aktiv false = Inaktiv true = Aktiv false = Inaktiv Device Reset Gerät rücksetzen Restore Factory Settings Auslieferungszustand wiederherstellen Remark [Unit] Standard Command SICK AG,...

Katalog auf Seite 5 öffnen

Alle Kataloge und technischen Broschüren von SICK

  1. W4F de

    17 Seiten

  2. IMS de

    12 Seiten

  3. SLG-2 de

    14 Seiten

  4. T-Easic FTS

    56 Seiten

  5. T-Easic® FTS

    4 Seiten

  6. SPEETEC

    2 Seiten

  7. outdoorScan3

    20 Seiten

  8. midiCam

    5 Seiten

  9. W4-3 PTFE

    4 Seiten

  10. SMART SENSORS

    28 Seiten

  11. EDS/EDM35

    13 Seiten

  12. TR110 Lock

    20 Seiten

  13. 24-h-Helpdesk

    8 Seiten

  14. outdoorScan3

    20 Seiten

  15. SICK Kompact

    118 Seiten

  16. Fluidsensorik

    243 Seiten

  17. Encoder

    483 Seiten

  18. Distanzsensoren

    404 Seiten

  19. Zone control

    5 Seiten

  20. T-Easic® FTS

    12 Seiten

  21. SPEETEC 1D

    6 Seiten

  22. STEEL INDUSTRY

    8 Seiten

  23. MultiPulse

    37 Seiten

  24. WTB16 Bluetooth®

    135 Seiten

  25. LFV 310/330

    48 Seiten

  26. WT18X-3P930

    2 Seiten

  27. QAL3 Master

    4 Seiten

Archivierte Kataloge

  1. FLOWSIC100

    4 Seiten

  2. 3D cameras

    6 Seiten