Führungsleisten
8Seiten

THE REOUIRED GUIDANCE OUALITY: PRECISION Spieth guide gibs - flat guides with adjustable Wherever precision guides are configured without the occurrence of high forces in the fields of precision construction and mechani- cal engineering, guide gibs designed by Spieth are there to lend a guiding hand:Theyoutper- form the taper and pressure gibs used else- That's because the flat linear guiding ele- ments by Spieth combined the benefits of slideways, e.g. high damping, with minimal guide play that can be optimally adjusted dur

FUNCTIONAL PRINCIPLE gram with enlarged play. The guide gib is fastened to the machine body with the screws. In this phase, the "flying" ends of the guide gib are still not flush with The firstpre-tensioning phase causes the ends of the guide gib to press flat against the ma- chine body. After further axial tensioning, the movement play between the guide block and the slide-

GUIDE GIBS SPIETH GUIDE GIBS FLW At Spieth, you'll find the perfect guide gibs for your application. And you can rely on the ex- pert advice of our specialists. The enhanced characteristics of the FLW series open up new possibilities for challenging linear guides. FLW flat guides are ready-to-install machine elements that allow you to realise minimal guide play on your machines without the use of significant manual force. The process of de- signing and machining the contact surfaces on the surrounding components is straightfor- ward, i.e. they are geometrically rectangular and parallel....

GUIDE GIBS ASSEAABLY EXAAAPLES Example 1: Guide block Standard arrangement of the guide gibs. In the case of a precisely executed guide, no stress occurs in the centre area of the guide block.This zone only exercises any effect when play exists (drawer effect). Example 2: Guide block with restricted length If the length of the slideway is limited, it is possible to achieve an Optimum guide basis in any guide block position by arranging one guide gib at the slideway and one guide gib at Example 3: Narrow bed guide The ratio between the length and width of the guide (guide basis) should be as...

SPIETH GUIDE GIBS SERIES FLW Perm, load 11 FLW 6 and FLW 8 without lubrication boreholes.

GUIDE GIBS ground parallel on all sides and coated with tungsten carbide. The integrated clamping screws are cheese-head screws to ISO 4762 (DIN 912), which are tightened with an ISO used to fasten the guide gibs are fitted with a thread and a recess for the screw head. This arrangement provides 2 different fixing op- tions.The guide gibs are provided with lubri- cating boreholes and are characterised by a high level of wear resistance and favourable emergency running characteristics. Depend- ing on the System, transverse grooves are pro- vided to remove dirt. Fastening concept Central...